Donaldson dedusting filter cartridge is a dedusting equipment with very good cleaning effect, but this kind of equipment also needs to be cleaned in the process of use. Today, in order to better use Donaldson dedusting filter cartridge, I have sorted out the correct cleaning methods of Donaldson dedusting filter cartridge for you to help you better use this kind of equipment. If you need, You are welcome to contact us or consult the manufacturer to learn about this aspect.

The correct cleaning method of Donaldson dust removal filter cartridge is as follows:

1. Use low pressure steam to purge the filter element from the inside to the outside, so as to remove the wax and high viscosity attachments on the outer surface of the Donaldson dust removal filter cartridge.

2. Use purified water at 40 ℃ - 60 ℃ and high pressure washing machine to wash away the large solid impurities on the outer surface of the Donaldson dust removal filter cartridge. The contact angle between the high pressure water and the filter element is less than 15 °, and then wash from the inner and outer surface of the filter element until no obvious dirty water flows out.

3. The oil pollution of Donaldson dust removal filter cartridge can be removed by degreasing solution or detergent. After degreasing, wash it with high pressure hot water, and clean the filter element in time. It can not only achieve good filtering effect, but also extend the service life of Pall filter element, reduce the number of replacement, so as to save costs

Statement: The above text is from the network. If there is any infringement, please contact us to delete it!